Automated pressure transmitter for calibration and testing system
Ahmad Muzaffar Abdul Kadir, Shahrizal Saat, Mohammad Afif Kasno, Ab Wafi Ab Aziz, Wan Norhisyam Abd Rashid
Pressure is one of the common parameters in Process Control whereby the periodvic calibration need to be done. Calibration is an important element in the measurement process instrumentation readings. Works calibration will be run periodically according to a pre-set schedule depends on how critical readings in need of the processes involved. If it is critical, works calibration will be run more frequently and vice versa, if readings are in need is for monitoring purposes only. Works calibration for pressure transmitter will be executed in two ways, namely in house and field calibration. Currently for both methods, the calibration will be run manually by a service engineer. The method used for supplying air pressure to the pressure transmitter is by using manual hand pump. The reading and data from the transmitter is presented the digital manometer. The calibration report is then generated manually by the engineer. The instrument for the calibration is particularly a pressure transmitter. For the calibration, at least two transmitters will be used. One pressure transmitter must be a Master Standard Unit (MSU), and the other(s) will be Unit under Test (UUT). For this paper the manual method is replaced by automatic control by utilising electrical and electronic equipment that is controlled by PID controller.
Ahmad Muzaffar Abdul Kadir, Shahrizal Saat, Mohammad Afif Kasno, Ab Wafi Ab Aziz, Wan Norhisyam Abd Rashid. Automated pressure transmitter for calibration and testing system. International Journal of Advanced Engineering and Technology, Volume 3, Issue 1, 2019, Pages 10-15